Overview (Continued)

Notes for recording

The recording times shown are not exact because the VCR/DVD Recorder uses variable bit-rate video com- pression. This means that the exact recording time will depend on the material being recorded.

When recording a TV broadcast, if the reception is poor or the picture contains interference, the record- ing times may be shorter.

If you record still pictures or audio only, the recording time may be longer.

The displayed times for recording and time remaining may not always add up to exactly the length of the disc.

The recording time available may decrease if you heavily edit a disc.

If using a DVD-RW disc, make sure you change the recording format (Video mode or VR mode) before you record anything on the disc. See page 24 (Disc Initialize) for how to do this.

When using a DVD-R disc, you can keep recording until the disc is full, or until you finalize the disc. Before you start a recording session, check the amount of recording time left on the disc.

When using a DVD-RW disc in Video mode, recording time available will only increase if you erase the last title recorded on the disc.

The Erase Title option in the Original (Title) menu only hides the title, it does not actually erase the title from the disc and increase the recording time available (except for the last recorded title on a DVD-RW disc in Video mode).

Recording TV audio channels

This recorder can record one or two channel audio. For TV broadcasts, this usually means mono or stereo, but some programs are broadcast with a main and a SAP (Secondary Audio Program) audio channel.

If you’re recording in Video mode (or in VR mode), you can record either the main audio or the SAP audio.

Restrictions on video recording

You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen.

Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode with CPRM (see below).

What is ‘CPRM’?

CPRM is a copy protection system (with scramble sys- tem) only allowing the recording of ‘copy once’ broad- cast programs. CPRM stands for Content Protection for Recordable Media.

This recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs format- ted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM.

Copyright

Audio and video recordings you make using this recorder are for your personal use only. You may not sell, lend or rent them to other people.

This product incorporates copyright protection tech- nology that is protected by method claims of certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision cor- poration. Reverse engineering or disassembly is pro- hibited.

INTRODUCTION

Disc type

Disc format

Recording mode

Functions

 

 

 

 

 

DVD-Video

Video format

n/a

Playback only

 

 

 

 

 

DVD-RW

Video Recording

VR mode

Playback, Recording, Original/Playlist Editing

 

format (default)

 

 

 

 

 

 

 

 

 

Video format

Video mode

Playback, limited Recording, limited Editing

 

 

 

 

 

DVD-R

Video format

Video mode

Playback, limited Recording, limited Editing

 

 

 

 

 

DVD+R

Video format

n/a

Playback only

 

 

 

 

 

DVD+RW

Video format

n/a

Playback only

 

 

 

 

 

9

Page 9
Image 9
Zenith XBR411 warranty Recording TV audio channels, Restrictions on video recording, What is ‘CPRM’?, Copyright