Basic Recording (Continued)

Dubbing from DVD to VCR

You can copy the contents of a DVD to a VHS tape using the DUBBING (or DUB) button.

Note :

If the DVD (or Discs) you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs (or Discs). “Copy-protected. Cannot record.” is displayed on the TV screen.

1Insert a blank VHS videotape into the VCR deck.Insert a VHS Tape

2Insert the disc you wish to copy in the DVD deck and close the disc tray.Insert a Disc

3Remote Control or pressing DVD/VCR on the front panel.Select DVD mode by pressing DVD on the

4you want to start dubbing using the PLAY, FF, REW and PAUSE functions.

For best results, pause playback at the point from which you want to record.Find the place on the DVD (or Disc) from which

Press the DUBBING button on the Remote

5 Control or DUB on the front panel.

The Dubbing menu appears.

Dubbing

 

Free Space

55%

Rec. Mode

SP

Dubbing

Stop

6 Use v / V / b / B to select the desired Record Mode:

• SP (Standard Play)

• SLP (Super Long Play, 3 times SP).

7DUBBING to start copying.

Tip :

If you press PAUSE during Dubbing mode, both the DVD and VCR decks go into Pause mode and the “DUB” indi- cator blinks on the front panel display. While in Pause mode, you can adjust the DVD playback position using PLAY, REW, FF, PAUSE/STEP, etc. The VCR deck will

remain in Pause mode. To resume Dubbing, press the

DUBBING button twice.) orSelect “Dubbing” then press ENTER (

Stop the Dubbing Process

8 To stop dubbing at any other time, press STOP (x). You must stop the dubbing process manually when the DVD movie ends, or the unit may replay and record over and over again.

Dubbing from VCR to DVD

You can copy the contents of a VHS tape to a DVD-R or DVD-RW using the DUBBING (DUB) button. This allows you to archive your old VHS tapes to DVD.

Note :

If the VHS video tape you are attempting to copy is copy protected, you will not be able to copy the tape. It is not permitted to copy Macrovision encoded tapes.

1Insert a blank DVD-R or DVD-RW disc in the DVD deck and close the disc tray.

Note :

When using a DVD-RW disc, you must initialize before copying; see page 24.Insert a DVD-R or DVD-RW disc.

2Insert the VHS video tape you wish to copy into the VCR deck.Insert a VHS Tape

3Remote Control or pressing DVD/VCR on the front panel.Select VCR mode by pressing VCR on the

4want to start dubbing using the PLAY, FF, REW and PAUSE functions.

For best results, pause playback at the point from which you want to record.Find the place on the VHS tape from which you

Press the DUBBING button on the Remote

5 Control or DUB on the front panel.

The Dubbing menu appears.

Dubbing

 

Free Space

01H54M

Rec. Mode

SP

Dubbing

Stop

Use v / V / b / B to select the desired Record

6 Mode:

• EP (Extend Quality)

• LP (Low Quality)

• SP (Standard Quality)

• XP (High Quality)

7DUBBING to start copying.

Tip :

If you press PAUSE during Dubbing mode, both the DVD and VCR decks go into Pause mode and the “DUB” indi- cator blinks on the front panel display. While in Pause mode, you can adjust the VCR playback position using PLAY, REW, FF, PAUSE/STEP, etc. The DVD deck will

remain in Pause mode. To resume Dubbing, press the

DUBBING button twice.) orSelect “Dubbing” then press ENTER (

Stop the Dubbing Process

8 To stop dubbing at any other time, press STOP (x). Dubbing will stop automatically when the VHS tape ends.

42

Page 42
Image 42
Zenith XBR411 warranty Basic Recording, Dubbing from DVD to VCR, Dubbing from VCR to DVD