Transition Networks SISTP10XX-141-LR(T) installation manual DIN rail mounting

SISTP10xx-141-LR(T) Industrial PoE Switch Transition Networks

DIN rail mounting, continued

DIN rail mounting To mount the Industrial PoE Switch to the DIN rail, see Figure 5 and do the following:

Step Action

1.Align and then position DIN-Rail-clip spring to the top of the DIN rail as shown in Figure 5, step (a).

2.Press DOWN on the Industrial PoE Switch and then IN to snap it into place on the DIN Rail. See Figure 5, step (b).

Figure 5: Industrial PoE Switch Mounting to DIN Rail

To remove the Industrial PoE Switch from the DIN rail, reverse the steps above.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 9