Menu Operations
5.2 TV System
When you enter the “TV System” menu you will see the screen like below:
1.Display Mode is used to switch the display mode. You can select from Auto / PAL /
2.Aspect Mode is used to switch the screen aspect ratio mode. You can select from Auto / 4:3 PS / 4:3 LB /
16:9. Press [Volume Up/Down] to select the needed mode.
3.Video output is use for switching the screen aspect ratio mode. Now we provide below options: RGB / CVBS. You can press [Volume Up/ Volume Down] key to select each mode circularly.
4.VCR Loopthrough is use for switching STB master and VCR master. When VCR Loopthrough is STB master mode, video output is available.
5.Select RF system between PAL B/G, PAL I, PAL D/K and NTSC M.
6.RF Channel: In case your TV is connected through RF modulator (UHF), select output channel number you want.
7.Press [MENU] to close the “TV System” menu.
5.3 Time & Timer Setting
When you enter “Time & Timer Setting” a menu with this 3 items will be opened.
1.Time: When you select “Time” and press [OK] then you will see a window like the one beside:
¾GMT Usage: This item is used to set the time by using the time signal from the satellite. Press [Volume Up/Down] to change the setting.
¾The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [Volume Up/Down] to set the “GMT Offset” value. With every time you press the button the time offset will be increased/decreased by half an hour.
¾“Date” and “Time” items are only available when the “GMT Usage” is set to “Off”. Press [Volume Up/Down] to select one item and use number buttons to input time and date directly.
27
