Trimble ThunderBolt E GPS Disciplined Clock User Guide 15
Setting up and Running the ThunderBoltE 2

Installing and using the software

All software programs for the ThunderBoltE are available online from the Trimble
website at www.trimble.com/timing.shtml. These programs enable you to monitor the
ThunderBolt E and change its configuration settings.
BTip – Install and set up the monitor program before turning on the ThunderBolt E—this
allows you to observe the timing process, from start up to fully functioning.

Trimble GPS Monitor

CCAUTION – Use only the Trimble GPS Monitor software with this product. Previous
versions may not be compatible.
To install the Trimble GPS Monitor (TrimbleMon) application from the website:
1. Go to http://www.trimble.com/TrimbleMon.shtml and then select
Support/ThunderBolt E Software Downloads /Installation Files.
2. Click Trimble Monito r Prog ram and then download the Trimble_Mon.exe file to
the computer’s hard drive.
3. To run the application, double-click the file. The Trimble GPS Monitor screen
appears:
Tx and Rx indicators COM port and settings