True Manufacturing Company T-35 Light Cover Installation for T-12FG, Required Tools, Step

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

Light Cover Installation for T-12FG

REQUIRED TOOLS

• none

- IMPORTANT -

Before installireplacng lampight cover turncabinetonandwaitallowunitiltoit reachestemperature. .

STEP 1

Locate rubber gasket behind lamp holder mounted to evaporator housing. (See Image 1).

1

Rubber Gasket

Lamp Holder

STEP 2

Fit the bottom edge of the lamp cover into the bottom groove of the rubber gasket and rotate upwards while working the edges into the rest of the rectangular groove. (See Images 2-3). (slide fingers underneath top edges of rubber gasket and push rubber over the top lip of the lamp shield)

STEP 3

Be sure lamp cover is seated properly in rubber gasket.

- NOTE -

If cabinet- IMPORTANTis turned off- and Beforeinteriorreplacingallowedtolightwarmcoverup turnlampcabincovert mayonandbecomewait untillooseit andreachesrequiretemperreinstallationture. . Follow directions above.

2

Lamp Cover

3

16 www.truemfg.com 16