COM2: COM2 Header
210
19
Use these pin definitions to connect a port to COM2.
*TYAN does not provide cable for this header. It is designed for barebone use only.
Pin | Signal | Pin | Signal |
1 | DCD | 2 | DSR |
3 | RX | 4 | RTS |
5 | TX | 6 | CTS |
7 | DTR | 8 | RI |
9 | GND | 10 | NC |
J11: Fan Board Connector for Barebone
1 31
142
It is designed for barebone use only.
Pin | Signal | Pin | Signal |
1 | 2 | ||
3 | 4 | ||
5 | 6 | ||
7 | 8 | ||
9 | 10 | ||
11 | GND | 12 | KEY |
13 | GND | 14 |
J12: TYFP2 Connector for Barebone
11 1
12 2
It is designed for barebone use only.
Pin | Signal | Pin | Signal |
1 | LAN1 LED+ | 2 | LAN1 LED- |
3 | LAN2 LED+ | 4 | LAN2 LED- |
5 | NC | 6 | NC |
7 | ID LED+ | 8 | ID LED- |
9 | ID SW+ | 10 | ID SW- |
11 | Key | 12 | Reserved |
J14/J15: USB Front Panel Connector
91
10 2
Pin 1 | USBPWR | Pin 2 | USBPWR |
Pin 3 | USB 4- | Pin 4 | USB 2- |
Pin 5 | USB 4+ | Pin 6 | USB 2+ |
Pin 7 | GND | Pin 8 | GND |
Pin 9 | KEY | Pin 10 | GND |
17
