Tyan Computer I5100X, S5375 Hardware Health Configuration Sub-Menu, Health Function Enabled

3.2.9 Hardware Health Configuration Sub-Menu

You can use this screen to view the Hardware Health Configuration Settings. Use the up and down arrow (Ç/È) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages.

	Advanced		BIOS Setup Utility
Main			PCI/PnP		Boot	Security	Chipset		Exit
Hardware Health Configuration							Enables Hardware
H/W Health Function					[Enabled]		Health Monitoring
Auto FAN Control					[Disabled]		Device.
PWM Minimal Duty Cycle					[50%]
Fan Fail LED Indicator					[Disabled]
Hardware Health Event Monitoring
Mainboard Voltages Report					:xx C/ xxx F		← → Select Screen
CPU0 Temp.
CPU1 Temp.					:xx C/ xxx F		↑↓ Select Item
Ambient1 Temp. (Near Memory)					:xx C/ xxx F		+/-	Change Option
Ambient2 Temp. (Near PXH)					:xx C/ xxx F		Tab	Select Field
Ambient3 Temp. (Near VGA)					:xx C/ xxx F		F1	General Help
CPUFAN1 Speed					:xxxx RPM		F10	Save and Exit
							ESC Exit
CPUFAN2 Speed					:xxxx RPM
FAN1 Speed					:xxxx RPM
FAN2 Speed					:xxxx RPM
FAN3 Speed					:xxxx RPM
Feature			Option			Description
Hardware Health Configuration
H/W Health Function			Enabled	Enables Hardware Health Monitoring Device.
			Disabled
		Disabled		FAN power duty cycle is auto dynamic
				programmed in selected temperature range.
Auto FAN Control				Disabled: Fan Power On.
			Enabled	Enabled: Fan Power Duty Cycle=50%(32˚C)-
				100%(0˚C), see max (CPU0, CPU1)
			50%	This item allows you to set minimum PWM Duty
PWM Minimal Duty			40%	Cycle.
Cycle			30%	Note: This item is hidden and will appear when
				Auto FAN Power Control is set to [Enabled].
			0%
Fan Fail LED Indicator		Disabled		Enabled: Any FAN speed less than 800 RPM,
			Enabled	the FAN Fail LED will be lighted.

51