http://www.tyan.com
30
Chapter 2
Onboard Resource Settings
Figure 2-18
Pin 1
Some symptoms of incorrectly installed HDDs are:
Hard disk drives are not auto-detected: may be a Master/Slave
problem or a bad IDE cable.Contact your vendor.
Hard Disk Drive Fail message at bootup: may be a bad cable or
lack of power going to the drive.
No video or beeps onbootup: usually means the cable is on back
wards.
Hard drive lights are constantly on: bad IDE cable or defective drives/
motherboard. Try another HDD.
Hard drives do not power up: check power cables and cabling.
May also be a bad power supply or IDE drive.