http://www.tyan.com
84
Figure E
Top Clip
Side Braces
Figure G*
Installing SECC2 CPUs - Option 2
Another method to secure an
SECC2 CPU is by using the
Universal Retention Module (also
provided by Tyan). The universal
retention module is designed to
accommodate most versions of
the Pentium Celeron CPUs.
Included in this solution is an
overhead clip to lock the CPU
into its slot along with the side
universal braces. See Figure E
(top) for the universal
retention module components.
Install the CPU, place the two
side braces at the ends of the
CPU slot (see Figure F left). The
screws on the motherboard
should fit through the holes of
the retention braces. Tighten
and secure both braces using a
screw driver.
Next, carefully insert the CPU
between the braces
and onto the CPU slot (see
Figure G right). Make sure the
CPU fan faces towards
the center of the
motherboard.
When the CPU is
secured onto the slot,
take the overhead clip
and insert the ends of
the clip over the top of
the side braces (See
Figure H on the follow-
ing page).
You will hear a click
when the overhead clip
is fitted securely into the
Appendix 2
Retention Module Installation
Figure F*