3.13 Connecting the Power Supply
The system power supply connectors on the mainboard is for a 5 volt power supply. Incorrect installation of the power supply could result in serious damage to the system board and connected peripherals.
Pin 1
Good Power Signal
VCC
+12V 5 volt
GND GND -5V
VCC
VCC
VCC
To connect the leads from either voltage power supply, you should first make sure the power supply is unplugged. Most power supplies have two leads. Each lead has six wires, two of which are black.
Orientate the connectors so the black wires are in the middle of the 5V power supply.
Caution: Some power supplies also include "3V" connectors. The connection wires normally have two colors with 3 black wires on one side. Please be very careful. Don't to use the wrong connec- tor.
17 | ||
|
|
|
|
|
|
|
|
|
