24 and 16 Port Smart Switch II – User Manual | Page 9 |
These option modules are installed as described on page 6.
The following
| Product | Part Number |
100 | Fx Module with SC multimode connectors | |
100 | Fx Module with ST multimode connectors | |
100 | Fx Module with SC singlemode connectors | |
Dual Gigabit Sx Multimode SC connectors | ||
Dual Gigabit Lx Singlemode SC connectors | ||
Dual Gigabit Copper Module 1000BaseT | ||
Table 1 - Uplink Option Ports
Optical Link Wavelength
The 100 Fx optional modules operate at the 1310nm optical wavelength. The Gigabit Lx Singlemode module operates at 1310nm and the Gigabit Sx multimode module operates at 850nm optical wavelength.
Optical Link Calculations
The maximum distance between any two fibre optic devices is determined by a number of factors including optical link loss, the type and number of patch cords and joints in the link, the launch power of the transmitter and the sensitivity of the receiver. These variables make calculating the maximum working distance between two units quite difficult and so it is best to design networks using optical loss budgets rather than using just working distance.
Dual Gigabit 1000BaseT copper module
The
It should be noted that Gigabit 1000T (1000Mbps) connection must use
Product Number | Issue 1 |
© Tyco Electronics 2005 |
|
