24 and 16 Port Smart Switch II – User Manual | Page 10 |
Programming The Switch
The switch can be managed using a PC via the front panel RS232 console port and the supplied cable. When the connection between Switch and PC is complete, turn on the PC and run a terminal emulation program such as HyperTerminal and configure its communication parameters to match the following default characteristics of the console port: -
Com 1 or Com 2
Baud Rate = 9600 bps
Data Bits = 8
Parity = None
Stop Bits = 1
Flow Control = None
Figure 5. Settings the PC communication parameters
Product Number | Issue 1 |
© Tyco Electronics 2005 |
|
