Philips HDD100 Basic Operation, Shutdown mode, Switching on from shutdown, Switching to standby

Models: HDD100

1 36
Download 36 pages 60.81 Kb
Page 15
Image 15

Basic Operation

Shutdown mode

When you switch on the hdd100 for the very first time after charging, hdd100 starts up from the shutdown mode. Shutdown mode is the default mode when:

Battery power is very low

Standby mode exceeds 250 hours *

hdd100 is brand new

hdd100 has been reset.

*For a fully charged battery. Actual time varies according to battery power at the time of shutdown.

Switching on from shutdown

Press 2; for 1 second to switch on your hdd100.

opening screen appears followed by the Music Library display.

Switching to standby

Standby mode is the power-saving mode and allows a fast wake-up.

Press 2; for 1 second to switch to standby.

TIP:

You can charge Jukebox in standby mode. No charging indication appears. Charging time is the same as for power shutdown or if Jukebox is switched on.

By default, hdd100 automatically also switches to standby if no audio file is being played and no controls are pressed after 2 minutes. If you like, you can adjust the standby timer setting (see page 26).

Power Consumption during standby

8.7mW

Switching on from standby

1 Press 2; for 1 second to switch on from standby.

If you were playing a track when you last switched off, you will see the track stop icon 9 in the playback screen upon wake-up.

2 Press 2; again to start playback from standby mode.

15

Page 15
Image 15
Philips HDD100 Basic Operation, Shutdown mode, Switching on from shutdown, Switching to standby, Switching on from standby