24 and 16 Port Smart Switch II – User Manual | Page 18 |
Port Tagging Control
This menu can be used to control the priority tag on Ethernet packets leaving the switch. This is set on a per port level. If option 6 is selected from the main menu then the following menu is displayed: -
Figure 12 – Port Tagging Control
There are 4 different settings for each port: -
Disable – No change to the priority tag will occur. If the tag is set on incoming packets, then it will remain on any outgoing packet that leaves the switch via the selected port.
Remove Tag – When a packet leaves this port the priority tag is removed.
Insert Tag (high priority only) – When a packet leaves this port a priority tag is inserted for all high priority port packets only.
Insert Tag (All Frame) - When a packet leaves this port a priority tag is inserted for all high and low priority packets.
System Control
This menu allows configuration of variables that will effect the
Product Number | Issue 1 |
© Tyco Electronics 2005 |
|
