Light Bulb Replacement
To replace the light bulb in your
2 |
1 |
ULIN_0001_A |
Figure 33
1.Grasp the edges of the light housing lens
(Figure 33, 1) opposite the exposed tab and gently push the lens toward the tab (Figure 33, 2).
2.Pull the edge of the lens down (Figure 33, 1) and swing it out of the light housing.
IMPORTANT
ALWAYS use a genuine
3.Replace the bulb only with a genuine
4.Replace the lens by first inserting the tab side back into the housing at a slight angle. While gently pushing the lens towards the tab end, push the free end up into the housing, and release when you will hear a snap/click.
Wine Rack Removal/Installation
To remove a rack from the cabinet:
1.Grasp the end of the rack, and gently slide it out until it stops.
2.Remove any bottles stored on the rack.
ULIN_0067_A
Figure 34
3.Press the left rack release lever (Figure 34) down, and at the same time, lift the corresponding right rack release lever up, and pull the rack out until it is free of the tracks and the cabinet.
IMPORTANT
Do not remove the track side rails from the cabinet.
To insert a rack in the cabinet:
1.Align the left and right rack channels with the tracks in the cabinet, and ensuring an even track engagement on both sides, gently push the rack into the cabinet until it stops.
2.Before reloading the rack, ensure proper operation of the travel stops in the left and right track rails by pulling the rack out gently until it completely stops.
1115WC, 1175WC | 19 |
