www.ultramagicard.com

AVALON and AVALON DUO Printer USER MANUAL

1.Installing the Printer (copy of the QuickStart Guide)

1.Unpacking

Avalon Printer

Hopper and Stacker

Power Cable

 

USB Cable

Driver CD

 

 

 

 

 

 

2.Consumables

Cleaning Cards & Roller Dye Film and Cards

Note: To complete installation and begin using your printer you will require a roll of Magicard dye-film and cards (not included).

3.Printer location requirements

Sufficient space for:

-opening the top cover

-cable access at the rear.

-allowance for air circulation.

An adequately ventilated dust free room.

Access to a properly grounded power supply.

Ambient temperature +10 to 30 degrees C.

Relative humidity 20 - 70%.

Protection from direct sunlight and chemicals.

Protection from abrupt temperature changes.

4.Attach the card output stacker

Insert the card collection stacker into the aperture in the front panel and hook into place. The stacker can hold up to 50, 30mil thick cards, after which it should be emptied. The printer can be operated without the stacker if you wish.

5.Attach the Card Feed Hopper

1.Open a clean pack of cards and make sure they are not sticking together. Load the cards into the feed hopper. Avoid touching the card surfaces because finger marks can effect image quality. Note: When using magstripe cards,

ensure the stripe is on the right and underneath when viewed from the front.

2.Tilt the loaded hopper back as shown, and lower gently into the receptacle at the rear of the printer. You will be able to lower the hopper about an inch (25mm).

3.At this point, tilt the hopper forward to the vertical position and lower all the way down until the hopper is completely within the body of the printer.

7.Install the dye film

1.Open a new roll of dye film.

2.Place the loaded spool into the rear clips and press it into place. The orientation is correct when the bar code on the end of the spool to the left hand side when viewed from the front. Rotate to make sure that the slot engages with the lug.

3.Place the empty take up spool into the front clips, and adjust the film tension so that the film is lying flat and straight between the two spools.

4.Press the top cover down until it clicks into the closed position. The printer will automatically recognize the type of film that has been loaded.

6.Prepare the cleaning cassette

Press down on the top cover, operate the top cover release catch and open the cover. First remove the white tape holding the black plastic cleaning cassette. Grip the handle between finger and thumb, then push and release the cleaning cassette. Remove the

orange tape and protective layer from the disposable cleaning cassette roller.

Note: This is a good time to familiarise yourself with the way that this automatic cleaning system is designed to operate.

Finally replace the cleaning cassette by inserting the roller shaft into the U shaped guides and clicking into place.

8.Plug in the printer

Make sure that the printer is turned Off, i.e. the On/Off button is slightly protruding from the front panel.

Plug the power supply lead provided into the socket on the rear panel of your printer, and the other end into a properly grounded electrical outlet.

Page 4 of 31

Page 4
Image 4
Ultra electronic M9007-224E Unpacking, Consumables, Printer location requirements, Attach the card output stacker

M9006-644E, M9006-654E, M9007-224E, M9007-225E specifications

The Ultra Electronics M9007-225E, M9007-224E, M9006-654E, and M9006-644E represent a series of advanced electronic systems designed for high-performance applications in various defense and aerospace sectors. Each model within this series incorporates cutting-edge technologies and features tailored to meet the rigorous demands of modern operations.

The M9007-225E and M9007-224E models are optimized for electronic warfare and surveillance applications. Key features include advanced signal processing capabilities, allowing for real-time analysis of electronic signals in complex environments. These systems utilize state-of-the-art digital antennas to enhance detection ranges and improve tracking accuracy. The integration of artificial intelligence algorithms facilitates adaptive frequency management, enabling the systems to automatically adjust to dynamic operational conditions.

Both M9007 models boast robust software architecture that supports seamless integration with various military platforms. Their modular design allows for easy upgrades and maintenance, ensuring long-term operational effectiveness. Furthermore, they are built with rugged materials to withstand harsh environmental conditions, maintaining functionality in extreme temperatures and vibrations.

On the other hand, the M9006-654E and M9006-644E systems are designed for communication and data processing tasks in network-centric warfare. These models emphasize high data throughput and low latency, making them ideal for real-time command and control applications. Equipped with multi-channel processing capabilities, they can handle multiple communication streams simultaneously while maintaining signal integrity.

The M9006 series incorporates advanced encryption technologies to ensure secure transmissions in sensitive military operations. They feature user-friendly interfaces, which simplify operational workflows and enhance user experience. Additionally, these systems are designed for interoperability with existing military communication networks, ensuring seamless data exchange across various platforms.

Overall, the Ultra Electronics M9007-225E, M9007-224E, M9006-654E, and M9006-644E systems exemplify the forefront of electronic technology. Their focus on modularity, adaptability, and performance enables military and defense operators to effectively navigate the complexities of modern warfare. With these capabilities, users can achieve superior situational awareness, communication reliability, and operational effectiveness, reflecting the ongoing evolution of electronic warfare and defense technologies. As military operations continue to become more complex, the importance of such advanced systems will only increase, solidifying their role as vital assets on the battlefield.