Ultra Electronics Card Systems | Quick Start Guide |
Test the
Printer Operation H
Print an Internally-Generated Test Card to make sure your printer is working correctly:
12
At the rear of the printer, locate the TEST Push-button. This is located in the rear panel, just above the Centronics parallel interface connector.
Press the push-button momentarily.
It will take a few seconds before printing commences. When finished, a Test Card will be ejected from the aperture in the Front Panel.
3
The card should be as shown, with Yellow-Magenta-Cyan-Black panels, a Cyan background and Yellow-Magenta- Cyan graduated scales. This card can only be printed by a printer in isolation, when using UR1 Dye Film. Note also that the internal software version is printed on the test card.
MAGICARD TURBO Color Printer | Page 13 |
