1.Hold down WX for about 2 seconds to turn on weather alert.
2.Hold down E for about 2 seconds.
If the scanner has not been set to alert for any FIPS code, ____ appears. If the scanner is set to alert for all FIPS codes, ALLFIPS appears. If the scanner is set to alert only for the area you programmed, F1 appears.
3.Turn the rotary tuner or repeatedly press HOLD U or LIMIT V to enter a FIPS code (1 through 15). Then enter the FIPS code and press E.
To set the scanner so it sounds an alert tone when it receives any FIPS code, turn the rotary tuner or repeatedly press HOLD U or LIMIT V to move ALLFIPS to F1. To set the scanner so it sounds an alert tone when it receives only one of the FIPS codes you programmed, turn the rotary tuner or repeatedly press HOLD U or LIMIT V to select F1 to F15. Then press E.
4.When you finish entering FIPS codes, press E.
34
