Duplicate Frequency Alert
If you enter a frequency already stored in another channel, the scanner beeps and the other channel appears. Press . on the keypad to start again or press E again to store the frequency in both channels.
Deleting a Stored Frequency
To delete a stored frequency, press 0 then press E. Channels with no frequencies are automatically locked out.
Programming a Channel With a CTCSS/DCS Tone
1.Press MANUAL.
2.Press CTCSS/DCS.
3.Select the channel you want to program then press E. If you have already programmed
aCTCSS or DCS tone, the frequency for the tone blinks. Otherwise, 000.0 HZ blinks.
4.Enter a CTCSS tone.
a.Use the keypad, rotary tuner, or HOLD U or LIMIT V to select the tone.
b.Then press E.
Notes:
•If you make a mistake while entering a tone with the keypad, press . on the keypad twice and enter the tone again.
•Make sure FREQ is lit before turning the rotary tuner to select a frequency.
5.To cancel CTCSS mode, press CTCSS/DCS or MANUAL. The CTCSS indicator and displayed tones are turned off but not deleted.
36
