Scanning
1. After programming |
|
|
|
|
|
|
|
|
|
| |
frequencies, simply | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
|
| ||||||||||
press | to begin |
|
|
|
|
|
|
|
|
|
|
scanning. |
|
|
|
|
|
|
|
|
|
| |
2.The bank indicators selected for scanning appear in the display, and the bank being currently monitored flashes. You can deselect banks from active scanning by pressing their number on your keypad. The indicator for each deselected bank turns off, and the bank’s channels are not scanned.
Note: One Bank must always be active. You cannot deactivate all ten banks at the same time. If you try to turn all the banks off, the first bank is automatically selected.
To restore a bank to active scanning, press the bank’s number on your keypad. The bank’s indicator will display again.
3.During normal scanning the scanner skips unprogrammed or locked
out channels.
SCAN
CHANNELS1 2 3 4 5 6 7 8 9 10
Frequency | Frequency not |
Locked Out | entered |
(L/O) |
|
4. When a transmission |
|
|
|
|
|
|
|
|
|
|
is received, the LCD | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|
back light comes on for five seconds and the scanner stops on that channel, provided that you have selected the Auto Light feature. When the transmission ends, scanning resumes automatically.
20
