6.If the connection is successful, the scanner starts frequency downloading.

7.donE will be displayed when your downloading is completed.

8.To start the scanner, you must turn the unit off/on.

If downloading is not successful, one of the following error messages will appear.

Err01: MODEM ACCESS ERROR

Err02: NO CARRIER

Err03: TELEPHONE LINE BUSY

Err04: NO ANSWER

Err05: SERVER CONNECT ERROR

Err06: DATA IDLE TIME OUT

NOTE: If the scanner does not display LoAd (see

step 6), disconnect the access by pressing . Then, make sure the modem is connected properly, and try again.

NOTE: The number preprogrammed into your scanner for downloading frequencies is 1-900-225-4822. There is a $0.99 per minute charge for using the SmartScan database.

The frequencies in the SmartScan database are updated, at a minimum, every 6 to 12 months. To get current frequencies, as well as

special /sporting event frequencies, regularly update your scanner by using SmartScan.

NOTE: If you are unable to dial a “900” number, check with your local phone company to find out if you have a “900” block on your phone line. This will prevent you from dialing to the server.

65

Page 65
Image 65
Uniden BC 245XLT manual