Remote Interface
You can communicate and program your BC 245XLT in
numerous ways with peripheral devices using the RS232C
port. This radio offers the following modes:
SMARTSCAN MODE
Automatically load frequencies, trunking talk
groups and fleetmaps from the Uniden National
Frequency Database server into your scanner
using an external modem or an internal modem
included with a PC.
REMOTE (PC Control) MODE
Program and control your scanner remotely from a
PC using third party software (see the flyer
included in the box).
CLONE MODE
Clone all the frequencies and trunking talk groups
and fleet maps programmed into your scanner to
another BC 245XLT.

Connecting the scanner

Scanner to PC

Plug the smaller end of the supplied RS232C cable into the
remote port which is on the right side of the scanner.
Plug the other end of the cable (DB-9 serial connector) into
a personal computer’s serial port. A few PC’s may require
an adapter, most will not. Of course, make sure your PC is
turned on.
To use SmartScan mode with an internal modem, you will
need a small custom software program to allow the serial
port to talk with the internal modem and act as a simple
“pass through” device. To download this free program, go
to Uniden’s website, look up under Scanners
“SmartScanner” or the BC 245XLT scanner, for the
62
888.8888
888
BATT
1 2 3 4 5 6 7 89 10
BANK
TRUNK
DATAPOLICE FIRE RR AIR
ATT
MRNWX
SCANSEARCHPRI HOLD DLY L/O
C:\Manuals\BC245 VA\BC245 VA rev.vp
Fri Nov 12 10:32:32 1999
Color profile: Disabled
Composite Default screen