dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode.
1.From a handset, open the menu and select Global Setup.
2.Select Dial Mode, then select Pulse. The phone sounds a confirmation tone.
If you use pulse dialing and you need to send DTMF tones during a call (if you’re using an automated response system, for example), press * to temporarily switch to tone dialing. When the call ends, the phone automatically returns to pulse dialing mode.
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset:
Do you have the base the handset is registered to?
Yes | No |
| |
1. | Press and hold END and # until the | 1. | Press and hold END and |
| System Reset menu appears (about 5 |
| # until the System Reset |
| seconds). |
| menu appears (about 5 |
2. | Select Deregister HS. The display lists |
| seconds). |
| all registered handsets. | 2. | Select Base Unavailable. |
3. | Select the handset you want to reset. | 3. | When the handset asks |
4. | When the handset asks you to |
| you to confirm, select |
| confirm, select Yes. The handset clears |
| Yes. The handset deletes |
| its information from the base and |
| its own link without |
| deletes its own link to the base. |
| contacting the base. |
|
|
|
|
Registering a handset
When you reset a handset (or if you buy a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.
37
