adapter for the charger. See the separate DRX312 or DWX317 user guide that was packaged with your phone.
6.Plug the other end of each adapter into a standard 120V AC power outlet.
7.Place one handset in the base and the other(s) in the charger(s) with the display(s) facing forward. The display on the handset should light up; if it doesn’t, reseat the handset or try plugging the AC adapter into a different outlet.
Charge all handsets completely (about 15 hours) before using them.
Connect the telephone cord
Connect the TEL line jack to a standard telephone wall jack.
Test the connection
1.Pick up the handset from the cradle and press Talk/flash. You should hear a dial tone, and the display should say Talk.
If you don't hear a dial tone, try checking the connection between the base and the phone jack.
2.Make a quick test call. (Press End to hang up.)
If the tone doesn’t stop when you dial, try changing to pulse dialing mode (see page 36).
If there's a lot of noise or static on the call, see page 35 for tips on avoiding interference.
3.Test any accessory handsets the same way. If you can’t get a dial tone or the handset display says Unavailable, try resetting the handset (see page 37).
Setting Up the CellLink™ Bluetooth™ Connection
The new DECT3181 with CellLink technology can connect with mobile phones that support the Bluetooth V2.0 handsfree profile.
Visit Uniden.com or contact customer service for a detailed list of tested mobile phones.
