You can set a different ring tone for each paired cellular phone (see page 16).
If you are using the DECT3181 to talk on one Bluetooth phone, the DECT3181 will not ring if a call comes in on another phone.
To pair another Bluetooth phone, just repeat the pairing procedure with the new phone. (If the paired phones interfere when you’re pairing the new one, just turn off Bluetooth on any paired phones until you finish pairing the the new one.)
handset. You may not hear a dial tone or ringing, but the handset display says Talk.
3. Make sure the call connects and you can hear clearly. (When you’re finished, press End to hang up.)
The DECT3181 remembers the pairing information for your cellular; if it loses connection with your phone for any reason (e.g., the cellular phone travels out of range, runs out of charge, etc.), the DECT3181 can automatically reconnect the next time your phone becomes available.
Using the DECT3181 with four Bluetooth phones
The DECT3181 can save the pairing information for four different Bluetooth phones, but it can only use one cellular line at any given time. For example, if you pair the DECT3181 to four Bluetooth
phones, when you press CellLink on the handset, the DECT3181 asks which phone you want to connect to.
2. Dial the number you want to call, then press
CellLink on the
Most cellular phones automatically transfer the audio to a Bluetooth device as soon as it pairs; if yours does not, look in your cellular phone’s Bluetooth setup for a “transfer audio” or “send audio to device” option.
To test the connection
1. Pick up the handset from the cradle.
