When you charge the handsets, Caller ID summary screen and the name of the handset, HS1 appears. If HS2 appears, you are charging the handset No. 2.

The charging cradle can be used to charge either handset.

Register Handsets to the Main Base Before Using!

Whichever handset you choose to charge in the main base will automatically register to the base.

The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps below to register the second handset.

1)Be sure both handsets are fully charged.

2)Remove the handset from the charging cradle, and place it in the main base. The charge/in use LED light on the main base will begin to flash, indicating that the registration is taking place.

3)Wait for at least 5 seconds before removing the handset from the main base.

4)Once both handsets are registered, it doesn’t matter which handset is placed in the main base or the charging cradle.

[ 14 ] G E T T I N G S TA R T E D

www.uniden.com

Page 14
Image 14
Uniden DXAI 5188-2 Series manual Register Handsets to the Main Base Before Using