Uniden DXAI 5188-2 Series manual Setting Menu Display Options, Setting AutoTalk and Cidcw

The cordless phone features include AutoTalkTM and AutoStandbyTM. AutoStandby allows you to hang up by simply returning the handset to the main base or chaging cradle.

Setting Menu Display Options

There are five setup options, AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language.

CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows HS1 in the display while the phone is charging.)

Setting AutoTalk and CIDCW

1) Press and hold call id/menu. The following screen appears.

2) Use vol/ / or vol/ / to move the pointer to the selection that you would like to change.

Press select/channel to toggle between On and Off.

3) Press end and return the handset to the main base unit to complete the setting. The handset returns to standby mode.

AutoTalk allows you to answer the phone without pressing the talk/flash key. If the phone rings when AutoTalk is on, simply remove the handset from either charging cradle and the phone automatically answers the call. If the phone rings when AutoTalk is off, you must press talk/flash to answer the call.

Entering your Area Code

If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

[ 16 ] G E T T I N G S TA R T E D www.uniden.com