•If you are not sure of your dialing system, set for tone dialing and make a trial call. If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones during a call, you can temporarily switch over to tone dialing. (Refer to "Tone Dialing Switch Over" on page 21.)
1)Be sure you are using handset 1. Handset 1 shows HS1 in its display while the phone is charging.
2) When the phone is in standby mode, press and hold call id/menu. The following screen appears.
3) Press vol/ 
/ 
three times to select Dial.
4)Press select/channel to set the phone to Pulse dialing.
5)Press end and return the handset to the main base unit to complete the setting. The handset returns to standby mode.
Setting the language
There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold call id/menu. The following screen appears.
2) Use vol/ 
/ 
to move the pointer to Language.
3) Press select/channel to select Eng, Fr. or Esp.
4)Press end or return the handset to the main base unit or charging cradle to complete the setting. The handset returns to standby mode.
[ 18 ] G E T T I N G S TA R T E D | www.uniden.com |
