Temporarily Mute the Base Ringer
Press the 
key to temporarily mute the incoming ring. The ringer will sound with the next incoming call.
Adjusting the Speaker Volume Level
You can adjust the volume of the base speaker by pressing volume/SELECT/ 
or volume/SELECT/ 
on the base. Press volume/SELECT/ 
for louder or volume/SELECT/ 
for softer while the base speaker is being used except for menu mode. The numbers [ 
]- [ 
] are displayed on the base indicating the volume levels. [ 
] being the softest and [ 
] being the loudest.
Using Your Answering System
The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. The flashing number represents the number of new messages, not total messages. The cordless phone is designed to play your new messages first. After you play all your new messages, you can then play your old messages.
When the answering system is full, [ 
] is displayed on the base, and the system announces "No remaining time." You should delete some messages so that the system can record new messages. (Refer to "Deleting a Message" on page 52.)
When you press
volume/SELECT/ 
at 9 or volume/SELECT/ 
at 0, an error tone sounds.
THE INTEGRATED ANSWERING DEVICE
www.uniden.com | T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 49 ] |
