There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold the caller id/menu key. The following screen appears.
2) Press the vol/ 
/ 
key three times to select Dial.
3) Press the select key to toggle between Tone and Pulse for each setting.
4)Press the end key or return the handset to the base unit to complete the setting. The handset returns to standby mode.
•If you are not sure of your dialing system, set for tone dialing and make a trial call. If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may "Switch Over" to tone dialing. (Refer to "Tone Dialing Switch Over" on page 21.)
Setting the language
1) When the phone is in standby mode, Press and hold the caller id/menu key. The following screen appears.
2) Press the vol/ 
/ 
key four times to select Language.
3) Press the select key to toggle Eng (English), Fr. (French) or Esp (Spanish) for each setting.
4)Press the end key or return the handset to the base unit to complete the setting. The handset returns to standby mode.
[ 18 ] G E T T I N G S TA R T E D | www.uniden.com |
