If either the handset or the base does not ring, check each ringer switch to make sure they are set
to “on”.
If audio on the speaker phone is not loud enough, adjust the speaker volume on the base.
16
From the handset
1 The phone rings. “Incoming Call” appears on the display.
2 Press 
if not in Auto Talk mode.
Press any key (except 
) if in Auto Talk mode. “ Talk” appears on the display. Then the earpiece volume is displayed for 2 seconds.
3 The
4 Press 
or place the handset on the base to hang up. The call time will be displayed for about 5 seconds.
From the base
1 The phone rings. The status LED on the base flashes.
2 | Press | . |
3 | Adjust the volume by pressing | |
| volume | as necessary. |
4 To hang up, press 
.
