29
4Press the or key to
select Edit Memory,
then press .
The following screen appears.
The cursor flashes indicating that the display is ready for the
name to be edited. When a name has not been stored, the
cursor appears at the beginning of the second line.
5Press , , , , or to edit
the name. (See page 24.)
To edit only the phone number, skip this step.
6Press .
The following screen appears.
The cursor flashes indicating
that the display is ready for the number to be edited.
7Use the number keypad, , or key to edit
the phone number.
The phone number cannot exceed 20 digits. (See page 24.)
When the phone number is not to be edited, skip this step.
8Press .
The handset beeps and displays
the confirmation screen. The
memory storage is complete.
For example, if you store a name and number into memory location
number 01, the display shows Memory01 Stored.
After about 2 seconds,
Memory Store is
displayed.
9Press to return to standby mode.
EXAI985HS 10/10/00 10:13 Page 29