If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged.
ADDITIONAL INFORMATION
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is
not necessary.
The first time you charge your handset, the security code is automatically set. (See page 4.)
In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1 Remove the handset from the base
unit. Press 
.
2 While the handset is emitting the paging sound, place the handset on
the base unit holding 
. The paging tone stops.
Leave the handset on the base longer than 3 seconds. A random, new security code is set.
53
