Manuals / Uniden / Communications / Cordless Telephone

Uniden EXV 990 manual Selecting a PIN Code, Calling Party Control Feature, LED displays

Models: EXV 990

1 36

Download 36 pages 39.39 Kb

Page 26

Color profile: Disabled

Composite Default screen

SELECTING A PIN CODE

To pick up your messages from a remote location, you enter

atwo-digit Personal Identification Number (PIN) code

(00-99). To select a PIN, perform the following steps:

1) On the base, press and hold the pin button until a beep sounds. The

LED displays 00.

Press skip or repeat

multiple times to scroll through numbers on the display.

2) To set the first digit, press skip or repeat to scroll from 00 to 90. When the desired number appears in the display, press pin. This selects the first digit.

3) To set the second digit, press skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press pin. This selects the second digit and the entered PIN is announced.

CALLING PARTY CONTROL FEATURE

The calling party control (CPC) feature automatically sets your answering system to disconnect and reset if the caller hangs up before leaving a message. This prevents your answering system from recording a hang up/dial tone.

24

C:\Exv990\exv990 part 2 of 2.vp

Wed Sep 09 08:58:03 1998

Image 26

Uniden EXV 990 manual Selecting a PIN Code, Calling Party Control Feature, LED displays

Contents

Page Contents T R O D U C T I O N EXV 990 FeaturesWelcome TIP Included in Your Package Back of the base InstallationCharge the battery refer to Charging the Battery Pack, Plug the AC adapter into a standard 120 VAC wall outlet Raise the base antenna to the vertical position Connecting the Handset Battery PackTo connect the battery Low battery indicator Charging the Battery PackInitial battery charging T T I N G U P Handset ringer tone and volume Setting the PULSE/TONE SwitchAdjusting Ringer Controls Handset earpiece volume To one of the more than 65,535 codes Automatic Digital Code SecurityTo change the digital code Cleaning Battery Contacts PAGE/FIND Making & Receiving Calls Standard calls without using the memory featuresUsing the memory features A N D a R D U S E Flash & Call Waiting Chain DialingChanging Channels Handset Speaker Phone I C E D I a L Base Handset removed from base Base speaker volumeBase Speaker Phone Handset in base Then you will hear Storing a Phone Number in MemoryI C E D I a L P R O G R a M M I N G Then press store Storing a Mixed Mode Number Remove the handset from the base Erasing a Stored NumberDialing a Stored Number You will hear Number will automatically dial Reviewing Numbers in Memory Press . You will hear To turn the dialing announcement off Monitor ModeDial Announce ON/OFF To turn the dialing announcement on Voice Memory Entry Tips Turning the Answering System ON/OFF FeaturesResetting improperly Is announced Press clock again to select the day Setting the ClockDay is announced Hour is announced PM or AM is announced T T I N G U P I T a DMinute is announced Recording your personal OGM Setting Your Outgoing Message OGMPreset messages Memo Announce only featureSelecting Message Time LED displays Calling Party Control FeatureSelecting a PIN Code Ring time/toll saver switch Setting the Toll Saver SwitchUsing the Reset Button After two or four rings. In the TS Playing Your Messages After you have reviewed your I N G a N S W E R System Skipping a Message Review your messages Deleting MessagesRecording a Conversation Then press and hold delete for 2 seconds Remote Access Away from Home Function Press Troubleshooting O B L E M G G E S T I O N Handset doesn’t ring or N D S E T N E R a LS E EXV 990 complies with FCC Parts 15 \Exv990\exv990 part 2 of 2.vp Wed Sep 09 085818