Remote Access Away from Home, Function Press | Uniden EXV 990

Color profile: Disabled Composite Default screen

You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

REMOTE ACCESS AWAY FROM HOME

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, or even to record a new outgoing message.

1)Call your telephone number.

2)During the outgoing message playback, press # followed by your PIN code. Refer to page 24 for instructions on how to select a PIN code.

3)The answering system announces the time and day stamp followed by the number of messages stored in memory. Message playback automatically begins.

4)You may continue to listen to your messages, or you may select a command from the following chart:

FUNCTION	PRESS

Repeat	# 1

Play	# 2

Skip	# 3

Delete	# 4

Stop	# 5

Answer On	# 6

Memo Record/Stop	# 7

OGM Record/Stop	# 8

Answer Off	# 9

Room Monitor	# *
	# *

5)After all of your messages have played, you will hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6)When you are finished, hang up to exit the system. The answering system automatically returns to standby.

30

C:\Exv990\exv990 part 2 of 2.vp Wed Sep 09 08:58:13 1998

Image 32

Uniden EXV 990 manual Remote Access Away from Home, Function Press

Contents

Page Contents T R O D U C T I O N EXV 990 FeaturesWelcome TIP Included in Your Package Installation Charge the battery refer to Charging the Battery Pack,Back of the base Plug the AC adapter into a standard 120 VAC wall outlet Raise the base antenna to the vertical position Connecting the Handset Battery PackTo connect the battery Charging the Battery Pack Initial battery chargingLow battery indicator T T I N G U P Setting the PULSE/TONE Switch Adjusting Ringer ControlsHandset ringer tone and volume Handset earpiece volume To one of the more than 65,535 codes Automatic Digital Code SecurityTo change the digital code Cleaning Battery Contacts PAGE/FIND Standard calls without using the memory features Using the memory featuresMaking & Receiving Calls A N D a R D U S E Chain Dialing Changing ChannelsFlash & Call Waiting Handset Speaker Phone I C E D I a L Base Base speaker volume Base Speaker PhoneHandset removed from base Handset in base Storing a Phone Number in Memory I C E D I a L P R O G R a M M I N GThen you will hear Then press store Storing a Mixed Mode Number Erasing a Stored Number Dialing a Stored NumberRemove the handset from the base You will hear Number will automatically dial Reviewing Numbers in Memory Press . You will hear Monitor Mode Dial Announce ON/OFFTo turn the dialing announcement off To turn the dialing announcement on Voice Memory Entry Tips Turning the Answering System ON/OFF FeaturesResetting improperly Setting the Clock Day is announcedIs announced Press clock again to select the day Hour is announced PM or AM is announced T T I N G U P I T a DMinute is announced Recording your personal OGM Setting Your Outgoing Message OGMPreset messages Memo Announce only featureSelecting Message Time LED displays Calling Party Control FeatureSelecting a PIN Code Setting the Toll Saver Switch Using the Reset ButtonRing time/toll saver switch After two or four rings. In the TS Playing Your Messages After you have reviewed your I N G a N S W E R System Skipping a Message Deleting Messages Recording a ConversationReview your messages Then press and hold delete for 2 seconds Remote Access Away from Home Function Press Troubleshooting O B L E M G G E S T I O N Handset doesn’t ring or N E R a L S EN D S E T EXV 990 complies with FCC Parts 15 \Exv990\exv990 part 2 of 2.vp Wed Sep 09 085818