5)Press menu/enter, and the display will show the current setting. (The initial setting is “No”.)

6)Press ▲ or ▼ to change the selection.

7)Press menu/enter.

8)Place the handset in the charging cradle of the base unit.

-The handset beeps and displays that the registration has finished.

Installing the Beltclip

To a t t a c h t h e b e l t c l i p

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To re m ove t h e b e l t c l i p

Pull both sides of the beltclip to release the tabs from the holes.

A D D I T I O N A L I N F O R M A T I O N

Headset Installation

Each handset can be used with any standard 2.5mm headset for hands-free operation. 1) Plug the headset into the headset jack on the side of the phone (remove the

rubber plug if it is covering the hole).

2) Calls can now be made using the headset.

To return to using the phone without a headset, simply unplug the headset.

A D D I T I O N A L I N F O R M AT I O N [ 39 ]

Page 45
Image 45
Uniden OCT4960-2 manual Installing the Beltclip, Headset Installation, To a t t a c h t h e b e l t c l i p