13.Press /KEYLOCK to turn ON or OFF the automatic 2-second delay during scanning or searching for active frequencies. (When delay is activated, DELAY appears on the display.) In this mode, when the scanner monitors an active frequency, searching or scanning will not resume until transmission stops for 2 seconds.

Press and hold /KEYLOCK until appears on the display. This disables the keypad and VFO

control and prevents any accidental key entries. To

enable the keypad, press and hold /KEYLOCK

until disappears from the display.

14.While Scanning, press /TURBO to activate the PRIORITY SCAN function. (PRIORITY appears on the

display.) While Searching, press /TURBO to toggle between 100 steps and 300 steps per second. (When in TURBO SEARCH is activated. SEARCH flashes on the display.)

15.Press to turn the Subaudible tone Mode on/off.

Press and hold to turn the Subaudible tone search on/off.

16.Press to turn the LCD Back light on and off.

Press and hold for 2 seconds to make the scanner turn the LCD Back Light on when a transmission is found (Auto Light function).

14

Page 16
Image 16
Uniden SC200 manual