6.If that frequency is already stored in another channel, you will hear a “beep”, and the other channel number will
appear on the display. If you want to store the frequency
in the selected channel (18) as well, press
again. The frequency will blink twice to confirm the programming.
Or, you can press 
and enter another frequency for the currently selected channel.
Note: Any frequency already stored in any channel will automatically be replaced by the new one.
7.If you try to enter a frequency that is outside one of the 12 Bands, you will hear a “beep”, and the wordError“ ” appears on the display.
Press 
and
8.To program another channel, repeat the above procedures.
Deleting a Stored Frequency
To delete a frequency from a channel:
1.Display the channel and frequency that is to be deleted.
2.Press 
on the numeric keypad.
3.Press 
. The current channel is erased, and the display shows 000.0000.
Note: That channel will be skipped during scanning.
B. Programming with Search
The Search feature enables you to rapidly search for active frequencies within the specified band limits. When an interesting frequency is found, you can store it into a channel using the procedure below. For more information about SEARCH Mode, see the section titled “Searching”.
1.Press and hold 
/BAND to enter the BAND SEARCH Mode.
20
