T h e U n i f i e r

Learning Method

The Unifier can learn commands from your old remote controls one-button-at-a-time by following these simple steps:

1

Line-up the Unifier with your old remote control,

 

head-to-head, one or two inches apart.

Press and hold both the desired DEVICE button

2 and the SELECT button for approximately three seconds. The top of the display will show “LEARN”. You are in LEARN mode now.

Note: You have 30 seconds to perform a step while you are in LEARN mode. If you don’t press a button within that time, the Unifier will time out and return to normal operation.

DEVICE

Buttons

SELECT

Button

8

Page 10
Image 10
Universal Remote Control URC-100 owner manual E U n i f i e r Learning Method