Modeling illuminator function
Press the [Test firing] button and the flash fires repeatedly at a reduced flash output level. This is useful for checking the illumination and the shadows cast on the subject before actually taking the picture.
•The flash fires as a Modeling illuminator for a maximum of approx. 1.5 seconds.
•This function operates only after the
■Setting the modeling illuminator using the [Test firing] button
Set to activate the Modeling illuminator in the custom setting.
•When the Modeling illuminator is activated, the modeling illuminator icon appears on the LCD panel.
■Modeling illumination using camera’s
When the
•This function can be performed without activating the
■Modeling illuminator in the Advanced Wireless Lighting
When the [Test firing] button on the master flash unit is pressed, the Modeling illuminator of the highlighted master unit or the remote flash unit group fires at the set flash output value.
•If the master flash unit and grouped remote flash units are not highlighted, the Modeling illuminator on the master flash unit only fires (except when the master flash unit’s flash firing is set to cancel.)
•When the camera’s
■Modeling illuminator in
operation (kD-50)
Only the Modeling illuminator on the master flash unit fires.
•
vDo not release the shutter while the Modeling illuminator is firing
If you release the shutter while the master flash unit’s Modeling illuminator is firing, correct exposure cannot be obtained.
D
Flash modes and functions