Flash shooting in Advanced Wireless Lighting
1.Setting the flash mode, flash output level compensation values, and channel number on the master flash unit
Press the Function button 1 on the master flash unit to highlight “”.
Press the [MODE] button, then turn the selector dial to choose the desired flash mode, and press the [OK] button.
Press the Function button 2, then
turn the selector dial to choose
the desired flash output level
compensation value, and press the
[OK] button.
Press the Function button 1 to highlight Group “”, and press the [OK] button.
• Turn the selector dial to choose a group other than “”.
Repeat procedures , above to set the flash mode and flash output level compensation values of the remote flash units in Group “A”.
In the same way with Group A, set the flash mode and flash output level compensation values of the remote flash units in Groups “B”and “C”.
Press the Function button 2, then turn the selector dial to set a channel number, and press the [OK] button.
D
Flash modes and functions