Univex user manual Main functions, SB-900status and settings functions

Main functions

Test firing (kD-60)

You can verify whether the subject will receive the correct exposure by test firing the SB-900.

Modeling illuminator (kD-61)

Before actually shooting you can check the illumination and the shadows cast on

Bthe subject.

About the SB-900

FX/DX selection (kD-62)

The SB-900 automatically selects the suitable light distribution angle, in accordance with the camera’s image area (between FX-format (36 x 24) and DX-format (24 x 16)).

SB-900 status and settings functions

Custom setting (kC-20)

Various settings can be made while checking the status on the LCD panel.

Two-button reset (kC-9)

This function resets various settings to their default values.

Key lock (kC-9)

The control buttons can be locked to prevent them from being pressed accidentally.

LCD panel illumination setting (kC-24)

This function sets the LCD panel illumination to on or off.

LCD panel contrast setting (kC-25)

This function adjusts the contrast of the LCD panel.

Standby function (kC-28)

This function automatically puts the SB-900 in standby mode to conserve battery power.

Continuous flash (kF-5)

The SB-900 fires continuously in sync with continuous shooting.

Thermal Cut-out (kF-6)

This function protects the SB-900 from high operating temperatures. If the temperature of the unit rises to a certain level, the SB-900 will switch to protective shutdown mode.

Self firmware update (kF-10)

Speedlight firmware can be updated through the camera.

B–6