Shooting with Repeating flash
Camera’s control panel
Camera’s control panel
Set the camera’s exposure mode to “M” (Manual).
Press the Function button 1, rotate the selector dial to set flash output level, and press the [OK] button to confirm.
•Available flash output level is 1/8 – 1/128.
Press the Function button 2,
rotate the selector dial to set number of flashes, and press the [OK] button to confirm.
Press the Function button 3, rotate the selector dial to set frequency, and press the [OK] button to confirm.
Determine the guide number according to the set flash output level and focal length, then calculate the correct aperture from the guide number and shooting distance. Finally, set this aperture on the camera.
•The guide number and aperture should be calculated using the calculation formula.
•The aperture on the
•The shooting distance indicated matches the selected flash output level and aperture.
D
Flash modes and functions