FOR YOUR SAFETY, READ BEFORE OPERATING

WARNING! - IF YOU DON’T FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

A. This appliance DOES NOT have a standing pilot ignition system. It is equipped with a hot surface ignition device that automatically lights the burner. DO NOT attempt to light the burner by hand.

B. Before starting the appliance, smell all around the appliance area for gas odor. Be sure to smell next to the floor because some gases are heavier than air and will collect on the floor.

WHAT TO DO IF YOU SMELL GAS

•DO NOT try to light any appliance.

•DO NOT touch any electric switch.

•DO NOT use any phone in your building.

•IMMEDIATELY call your gas supplier from a neighbor’s phone.

Follow the gas supplier’s instructions. If you cannot reach your gas supplier, call the fire department and/or ‘911’.

C. Use only your hand to push in and turn the gas control knob. NEVER use tools. If the knob will not turn by hand, do not try to repair it. Call a qualified service technician. Using force or attempting to repair may result in a fire or explosion.

D. Do not operate this heater if any part has been under water. Immediately call a qualified service technician to inspect the heater and replace any part of the control system and any gas control that has been under water.

OPERATING INSTRUCTIONS

1.STOP! Read the safety information above on this label.

2.Turn off electrical power to appliance at switch on upper left side panel.

3.Remove front access panel by lifting on handle until bottom of panel is released, tilt bottom of panel away from unit and remove.

4.This appliance is equipped with an ignition device which automatically lights the burner(s). DO NOT try to light the burner(s) by hand.

5. Turn the gas control

knob clockwise to the ‘OFF’ position. (Fig. 7)

6.Wait 5 minutes to clear out any gas. If you smell gas, stop and follow the instructions under “WHAT TO DO IF YOU SMELL GAS” (ABOVE). If you do not smell gas, proceed to the next step.

7. Turn gas control knob counterclockwise

to the ‘ON’ position.

8.Turn on electrical power to the appliance. Be careful not to contact any live electrical connections when access panel is open.

9.If appliance does not ignite, there may be air in the gas supply system. Repeat the cycle several times to remove air.

10.If the appliance will not operate, follow the instructions under “TURN OFF GAS TO APPLIANCE” (following) and call your service technician or gas supplier.

11.Replace front access panel.

14

Page 15 Page 17
Page 16
Image 16
Vanguard Heating PM200, PM400 operation manual For Your SAFETY, Read Before Operating, Operating Instructions
Page 15 Page 17

PM200, PM400 specifications

The Vanguard Heating PM200 and PM400 models represent a significant advancement in the world of heating solutions, designed specifically to provide efficient and effective warmth to various spaces. These heating units are renowned for their performance, reliability, and innovative features, making them ideal for both residential and commercial applications.

The PM200 is a compact yet powerful heating solution that delivers an impressive 200,000 BTU output. This model is particularly favored for smaller spaces or areas where precise heating is required. One of its standout features is its user-friendly digital thermostat, allowing for easy temperature adjustments and precise control over heating schedules. This digital interface enhances user experience, providing necessary information at a glance and facilitating efficient energy usage.

On the other hand, the PM400 offers an even more robust heating capacity, with an output of 400,000 BTU. This model is designed for larger spaces or commercial environments that demand higher heating output. Both units come equipped with advanced technology that allows them to operate efficiently while minimizing energy consumption. The high-efficiency heat exchangers used in both models are engineered to maximize heat transfer, ensuring that energy is used judiciously.

Vanguard Heating has also incorporated safety features into the PM200 and PM400 to enhance user protection. Each unit comes with an integrated overheat protection system, ensuring that operations are safe even during extended usage. Additionally, the units are designed with durable materials that contribute to their longevity, minimizing the need for frequent replacements or repairs.

Both models are versatile, allowing for various installation methods, including wall-mounted or freestanding configurations. This adaptability ensures that they can fit seamlessly into any space without disrupting the overall aesthetic.

Moreover, the PM200 and PM400 units are engineered for quiet operation, which is a crucial feature for both residential and commercial settings. Their design ensures that they do not become a source of distraction, allowing users to enjoy a comfortable environment without the accompanying noise often associated with traditional heating systems.

In summary, Vanguard Heating PM200 and PM400 models are excellent choices for those seeking reliable, efficient, and user-friendly heating solutions. With their range of features and technologies, they continue to set the standard in the heating industry, ensuring users enjoy optimal comfort in any setting.
Top Page Image Contents