TO TURN OFF GAS TO APPLIANCE
1.Turn off all electric power to the booster heater if service is to be performed.
2.Turn off manual gas valve in gas supply piping.
3.Remove front access panel by lifting panel to release bottom, tilting panel away from unit and removing panel.
4.Push in and turn gas control knob clockwise
to the ‘OFF’ position.
5.Replace front access panel.
WARNING!
IF OVERHEATING OCCURS OR THE GAS SUPPLY FAILS TO SHUT OFF CORRECTLY, DO NOT TURN OFF OR DISCONNECT ELECTRIC SUPPLY TO THE PUMP. SHUT OFF GAS SUPPLY AT THE MANUAL GAS VALVE IN GAS SUPPLY PIPING. IF WATER IS LEAKING FROM UNIT, AFTER TURNING OFF GAS, LET BURNER COOL, THEN TURN OFF POWER AND SHUT OFF WATER SUPPLY VALVE.
15
