SOUND SETTINGS

SDVC (speed-dependent volume increase)

To compensate for environmental noise, the volume for audible information increases as a function of the speed.

☞Choose a setting for the speed-dependent increase of the volume.

☞Select OFF to deactivate the function or select 1 to 5 to choose the desired volume increase. 1 is the lowest, 5 the highest volume increase.

Sound Setup

Setting one of the following functions:

–Sound Reset: Reset the sound setting to the factory-set

values and switch off loudness.

–Leveller: Activate this function to equalise volume differences

between the various sound sources.

–Loud Low: Set the enhancement of low tones at loudness.

–Loud High: Set the enhancement of high tones at loudness.

–Bass Freq: Select the transitional frequency for the low tones.

–Treb Freq: Select the transitional frequency for the high tones.

Initialisation

See “INITIALISATION” ➽ page 37.

28