NAVIGATION
Via point input
If you wish to visit other locations en route to the entered destination address, these can be stored as via points. The navigation system then plans the route to include the via points in the given sequence before the destination address is reached.
When you reach a via point, you will hear “You have arrived.” The navigation system will immediately begin to plan the route to the next via point or the final destination.
New address 
Load address Last destin.
Info on car pos.
In the address manager or on the “Via points” information screen you can delete via points you have not reached yet or which you do not wish to visit any longer.
☞In the main control, select “Via point input”. The “Via point input” menu appears.
The following options are available in the “Via point input” menu:
New address
Input country, city, road, number or junction or special facility as via point.
Load address
Loading an address stored in the address book as a via point.
Last destin.
Recall one of the 10 addresses last used for guidance to load as a via point.
Info on car pos.
Loading a special facility in the vicinity of the current position of the car.
Geo.
Entering a destination by means of GPS coordinates (geographic latitude and longitude).
Travel info
If you have enabled a
The input of a via point is identical to the input of a destination address.
Viapoint input is limited in the same way as destination input when the map CD is not inserted.
50