NAVIGATION
Special facilities in the vicinity of the current position
You may also set a destination address by selecting a special facility in the vicinity of the current vehicle location.
☞Select “Info on car pos.” in the destination input menu. A list of categories of special facilities is shown.
☞Select the required category.
A list of facilities pertaining to the selected | Railway station |
category, located in the vicinity of the current | BAHNHOF WILHELMSDO |
| |
vehicle location, appears. Additionally, distance | 24 km |
and direction to the facilities are shown. | |
☞ Proceed as described on the previous page. | BAHNHOF USINGEN |
| 26 km |
You will always see a list of facilities from “Info on car pos.”, even if there is no facility from the selected category directly at the car position.
The facilities list is sorted by distance to the car position, i.e. the facility closest to the car position will be first in the list.
English
Destination input via GPS coordinates
If you know the GPS coordinates of a destination, you may enter them directly.
☞In the main menu, select “Destination input”
☞Select “Geo.
The GPS coordinates input menu appears.
☞Mark the desired coordinate using the cursor. Confirm by pressing the right rotary control.
☞Next, set the required values for degrees, minutes, seconds and north/south or east/west. Confirm the destination input with “OK”.
The navigation system compares the GPS coordinates you entered with the data on the current map CD and plans the route.
Notes:If the destination is beyond the digitised roads, the system will guide you along digitised roads as far as possible. The system will then display the linear direction and the distance to the destination.
If the GPS coordinates you entered should be outside the limits of the current map CD, the system will display an error message.
Destination input via GPS coordinates is only supported if the map CD is inserted.
49