RADIO

Setting frequency manually

☞

☞

☞

☞

✎

Activate “Manual tuning” in the radio menu. ➽ next page.

Slowly turn the right rotary control to the right or left in order to change the reception frequency step-by-step.

Turn the control quickly by a few notches in order to start a fast search. Press the control to stop the search.

Press the control again to return to the automatic search.

After 50 seconds, the radio switches back to automatic waveband tuning.

Presets

You can store 6 stations for each waveband on the preset buttons from 1 to 6.

☞

☞

✎

✎

Tune to the desired waveband and station.

Press the desired preset button until you hear a confirmation tone. The station selected is stored on the preset button.

Stations cannot be stored manually in the FM AS and MW AS wavebands, these are used exclusively for the Autostore function. ➽ “RADIO” menu.

Recalling stored stations

☞Tune to the desired waveband.

☞Press one of the preset buttons in order to recall the desired station.

The “RADIO” menu

In radio mode:

☞Press the MENU button.

￿The “RADIO” menu is displayed. The following functions are available:

RDS Memo (only in FM)
RADIO RDS MemoAutostore Station list Preset list

Searches for all currently available RDS stations and stores them in alphabetic order in the station list.

☞

✎

Activate this function to refresh the RDS Memo. Refreshing the RDS Memo may require up to 30 seconds.

Autostore

☞Activate this function to automatically store up to 6 FM/AM stations with strong signals on the FM AS or AM AS waveband.

Station list (only in FM)

☞Select a station from the alphabetically sorted stations list (RDS Memo).

Preset list

☞Select a previously stored station from the preset list for the selected waveband, FM, MW, SW or LW.

30